Pro-face's website for advanced HMI products

Posted: 2006, March 17

Thank you very much for your continuous use of Pro-face products.
We have confirmed that the following symptom has been seen in USB Data Transfer Cable (GPW-CB03).
The symptom for this problem are indicated below.
We sincerely apologize for any inconvenience this may cause you.

The combination of the USB Data Transfer Cable (GPW-CB03) Rev1 and the driver v1.5 do not work in the following functions. It is necessary to update the driver to the latest one.

• Two built-in port functions of Mitsubishi PLC
• The laader monitor of GLC
• The laader transfer of PLC

Product Name: USB Data Transfer Cable
Mode No.: GPW-CB03 (Rev1 , supporting Rohs)

Serial numbers of products which have the related driver

34527280001- 34527280500
34527600001 - 34527600600
34527820001 - 34527820600

The chip in the USB Data Transfer Cable has been changed to a new type , and production of the old type has been stopped.
Since V1.5 driver does not completely initialize the new USB chip, some transfer functions are not available.

Change the USB Data Transfer Cable(GPW-CB03) driver to V2.0.
The latest driver(V2.00) is available through our homepage “Otasuke Pro”.

GPW-CB03: Check the label an the cable. If there is “Rev1”, it’s the effected product.
Refer to the following photograph. (RoHS mark also means it’s the effected product.)

Driver version confirmation method : (confirm with USB Data Transfer Cable in a connected state): In the case of XP :

1. Right-click “My Computer” and select “Property”.
2. Select the tab “Hardware” and click the “Device Manager”.
3. Double-click “Port” and right-click “ Pro-face GPW-CB03” and select “Property”.
4. Select the tab “Driver”. If version is “V1.5.0.0”, it is necessary to upgrade the driver V2.0.

If there any are problems up deting using the methods described, contact our sales staff or customer service center.

8-2-52 Nankohigashi, Suminoe-Ku, Osaka 559-0031 Japan
CC Headquarters, CS Department Support Dial (Telephone Support)

■ Weekdays 9:00 to 17:00 Japan Time

Osaka TEL: +81-6-6613-3116 (for English calls)

If you have any inquiries, please contact our sales office in your region.
For contact information, please refer to the "Inquiry" page.